Für die Filterung wurden keine Ergebnisse gefunden!
SP Bel-Art Round Microcentrifuge Floating Racks;For 1.5ml Tubes, 20 Places, Fits in 1000mlBeakers (P Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly pressing down against the bench until the legs touch, releasing the tubes Racks are 6.4mm (¹/?") thick with 19mm (³/?") long...
Inhalt 4 Stück (14,77 € * / 1 Stück)
59,08 €
Bestell-Nr.: 2455973
Hersteller-Art.-Nr.: F18875-6411
SP Bel-Art Microcentrifuge Floating Rack; For1.5ml Tubes, 24 Places, Polypropylene (Pack of 4) Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4¹¹/?? x 3¹/??")
Inhalt 4 Stück (15,38 € * / 1 Stück)
61,51 €
Bestell-Nr.: 2455974
Hersteller-Art.-Nr.: F18876-0000
SP Bel-Art ProCulture Cryotube Floating Bubble Rack; 20 Places, Polypropylene This 20 place polypropylene round floating rack fits most cryotubes and holds them tightly in a circular pattern formed by 12 outer and 8 inner openings. Excellent for holding cryotubes during work or incubation Floats in water; can also be used for quickly thawing frozen cells in a 37ºC water bath Easily remove tubes by holding the center handle and pushing the rack down...
Inhalt 1 Stück
38,92 €
Bestell-Nr.: 2455975
Hersteller-Art.-Nr.: F18876-0020
SP Bel-Art Test Tube Rack Slanter; Fits Racks upto 11?/16 in. x 9?/16 in. x 3¼ in. Tilt your test tube rack to 25°, 35° or 45° to reduce hand strain when working with pipettors. Also ideal for creating agar slant tubes or use with the Mini-Magnifier (F37865-0000) to aid in the viewing of Petri dishes. Base legs have predetermined slots that stand slides in and out of to easily change angles Fits racks up to 29.3 x 24.2 x 8.3cm H (11????” x 9????” x 3¼”)...
Inhalt 1 Stück
32,42 €
Bestell-Nr.: 2455976
Hersteller-Art.-Nr.: F18890-0100
SP Bel-Art Microcentrifuge Tube Ice Rack; For 400Microliter Tubes, 105 Places These two piece racks include a lower tray to hold water or ice flakes. Choose from two sizes to best suit your needs. Small rack holds 105, 400 ?L microcentrifuge tubes or other tubes with a diameter of 8mm and is stackable. Large rack holds 120, 1.5ml microcentrifuge tubes or other tubes with a diameter under 12mm and is not stackable. Molded of high-impact polystyrene.
Inhalt 1 Stück
133,11 €
Bestell-Nr.: 2455977
Hersteller-Art.-Nr.: H18901-0000
SP Bel-Art PCR Rack; For 0.2ml Tubes, 96 Places,Assorted Colors (Pack of 5) Designed for preparing and storing 0.2ml thin-walled PCR tubes and strip tubes before or after PCR sample processing applications. Compact polypropylene rack has 96 wells that keep tubes securely upright in an 8 x 12 array. Rack has an alphanumeric grid to assist in easy sample identification. Includes translucent polypropylene cover to protect samples and allows viewing...
Inhalt 5 Stück (26,26 € * / 1 Stück)
131,28 €
Bestell-Nr.: 2455978
Hersteller-Art.-Nr.: F18902-0005
SP Bel-Art Microcentrifuge Tube Ice Rack/Tray;For 1.5ml Tubes, 50 Places Capturing hazardous chemical and contaminant spills when transferring from one vessel to another is easy with these portable spill containment trays. Large tray has a spill surface that will support multiple flasks, beakers or a rack of test tubes Smaller tray is ideal for smaller vessels and tight spaces Can also be used for storing hazardous, corrosive chemicals, stains,...
Inhalt 1 Stück
75,84 €
Bestell-Nr.: 2455979
Hersteller-Art.-Nr.: F18905-0001
SP Bel-Art Lid for SP Bel-Art MicrocentrifugeTube Ice Rack/Tray F18905-0001 This tray with rack insert can accommodate up to fifty 1.5ml tubes (or other tubes with a diameter less than 12mm) for large volume benchtop processing. To further protect tubes during transport or storage while also maintaining stackability, an optional polypropylene cover is available. Deep tray holds more ice and water for extended use time Includes flat perimeter rim for...
Inhalt 1 Stück
25,75 €
Bestell-Nr.: 2455980
Hersteller-Art.-Nr.: F18905-0011
SP Bel-Art Connecting Microcentrifuge Tube Rack;For 1.5-2.0ml Tubes, 24 Places Maximize storage and save benchtop space with microcentrifuge tube racks that are stackable when loaded or empty. Locking clips firmly connect multiple racks together to form larger arrays that can be easily transported. Securely holds 24 microcentrifuge tubes, either 0.5 ml or 1.5 - 2.0ml Can be combined when multiple tube sizes are used Durable, lightweight polycarbonate;...
Inhalt 1 Stück
40,07 €
Bestell-Nr.: 2455981
Hersteller-Art.-Nr.: F18908-0015
SP Bel-Art Pipette Support Rack; 16mm, 50 Places,8? x 4½ x 8¾ in., Polypropylene Sturdy polypropylene plastic rack holds 50 pipettes in a vertical 5 x 10 arrangement. Top and middle decks have 16 mm diameter holes; bottom deck holes are tapered from 16 mm to 6 mm diameter. Pipette tips will not contact table surface End plates have handles for easy carrying Steam autoclavable at 121ºC (250ºF)
Inhalt 1 Stück
61,39 €
Bestell-Nr.: 2455991
Hersteller-Art.-Nr.: F18953-0000
SP Bel-Art Triple Holder Clamp for PiRackPolypropylene Pipettor Holder System This polypropylene system is strong enough to support the weight of even the heaviest pipettor. Hold a single pipette with one clamp or add a triple clamp or extenders to increase the number of holders at a work location. Utility tray mounts between two clamps; ideal for storing pipetting supplies or other small items Perfectly sized for No Wire™ Half Racks that hold tubes,...
Inhalt 1 Stück
48,88 €
Bestell-Nr.: 2455992
Hersteller-Art.-Nr.: F18954-0000
SP Bel-Art Pipette Support Stand; 28 Places,Polypropylene Polypropylene plastic stand has a two-section top plate; one with 10 holes, 14mm in diameter, the other with 18 holes, 11mm in diameter. Holes in the lower plate are 4mm in diameter and support the tips of the pipettes as they are held in the stand. For safe and orderly storage of up to 28 pipettes
Inhalt 1 Stück
47,97 €
Bestell-Nr.: 2455993
Hersteller-Art.-Nr.: F18955-0000
SP Bel-Art ProCulture Tissue Culture Flask Rack; 12 Places, For 75ml Flasks These polypropylene racks hold 25cc, 75cc (50 - 75 ml or 250 - 260 ml) or similar sized tissue culture flasks in a vertical position. Flasks can be easily organized to improve processing and to avoid errors in collecting used media, media change, washing of cell monolayer, trypsinization and seeding of cells. Rectangular holes in the top and center plates stabilize the...
Inhalt 1 Stück
97,03 €
Bestell-Nr.: 2455994
Hersteller-Art.-Nr.: F18970-0001
SP Bel-Art Poxygrid 100mm Petri Dish CarryingRack; 15 Places These epoxy coated steel wire racks hold 100mm x 20mm plastic Petri dishes and are easily loaded and emptied from the top. Wide front openings permit easy access but prevent dishes from sliding out Not suitable for glass Petri dishes Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)
Inhalt 1 Stück
64,83 €
Bestell-Nr.: 2455995
Hersteller-Art.-Nr.: H18978-0000
SP Bel-Art Poxygrid 100mm Petri Dish DispensingRack; 5¾ x 4¼ x 11 in., 11 Places Poxygrid® 100mm Petri Dish Dispensing Racks hold 11 or 33 plastic Petri dishes (100mm x 20mm). Petri dishes are easily dispensed one at a time from the bottom of the stack; dishes are loaded at top of rack Rack tilts toward the rear for convenient presentation of dishes Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F) Not...
Inhalt 1 Stück
60,84 €
Bestell-Nr.: 2455996
Hersteller-Art.-Nr.: F18978-0001
SP Bel-Art Poxygrid 100mm Petri Dish DispensingRack; 5¾ x 12¾ x 11 in., 33 Places Poxygrid® 100mm Petri Dish Dispensing Racks hold 11 or 33 plastic Petri dishes (100mm x 20mm). Petri dishes are easily dispensed one at a time from the bottom of the stack; dishes are loaded at top of rack Rack tilts toward the rear for convenient presentation of dishes Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F) Not...
Inhalt 1 Stück
162,06 €
Bestell-Nr.: 2455997
Hersteller-Art.-Nr.: F18979-0001
SP Bel-Art Poxygrid 60mm Contact Plate/Petri DishRack; 3¼ x 9? x 5½ in., 30 Places Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson). Useful for transport, incubation and storage of contact plates; convenient organization Steam autoclavable at 121ºC (250ºF)
Inhalt 1 Stück
98,30 €
Bestell-Nr.: 2455998
Hersteller-Art.-Nr.: F18979-0002
SP Bel-Art Poxygrid 60mm Contact Plate/Petri DishRack; 3¼ x 3¼ x 5½ in., 10 Places Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson). Useful for transport, incubation and storage of contact plates; convenient organization Steam autoclavable at 121ºC (250ºF)
Inhalt 1 Stück
43,84 €
Bestell-Nr.: 2455999
Hersteller-Art.-Nr.: F18979-0003
SP Bel-Art Poxygrid Test Tube Rack; For 20-25mmTubes, 60 Places Chemical and corrosion-resistant steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F); autoclavable All racks have square holes, three decks, a slotted grid bottom and reinforced edges
Inhalt 1 Stück
65,03 €
Bestell-Nr.: 2455930
Hersteller-Art.-Nr.: F18774-0160
SP Bel-Art Poxygrid Half-Size Test Tube Rack;For 13-16mm Tubes, 24 Places, Orange Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy Unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a...
Inhalt 1 Stück
52,64 €
Bestell-Nr.: 2455931
Hersteller-Art.-Nr.: F18788-1603
SP Bel-Art Poxygrid Half-Size Test Tube Rack;For 16-20mm Tubes, 20 Places, Orange Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy Unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a...
Inhalt 1 Stück
52,40 €
Bestell-Nr.: 2455932
Hersteller-Art.-Nr.: F18788-2003
SP Bel-Art Poxygrid Centrifuge Tube Rack; For50ml Tubes, 8 Places, Blue Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable
Inhalt 1 Stück
72,32 €
Bestell-Nr.: 2455933
Hersteller-Art.-Nr.: F18794-0000
SP Bel-Art Poxygrid Centrifuge Tube Rack; For50ml Tubes, 16 Places, Blue Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable
Inhalt 1 Stück
75,17 €
Bestell-Nr.: 2455934
Hersteller-Art.-Nr.: F18794-0001
SP Bel-Art Poxygrid Centrifuge Tube Rack; For50ml Tubes, 36 Places, Blue Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable
Inhalt 1 Stück
109,30 €
Bestell-Nr.: 2455935
Hersteller-Art.-Nr.: F18794-0002