Zubehör

Used to secure pH, O2­, or temperature sensors in large spinner flasks with vertical sidearms Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. The 316 sensors are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable. Spare parts for sidearm...

Used to provide gases into larger spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable....

Stainless steel impeller shaft with modified impeller blade for use with probes to create a small bioreactor. Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 8L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

Stainless steel impeller shaft with modified impeller blade for use with probes to create a small bioreactor. Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 15L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

High torque, low rpm stirrer designed to maintain constant low speed. Gearhead stirrer delivers 14.5 in lbs of torque. Maximum speed is 350 rpm. Weight of motor is 9 lbs (4.1kg). Available with 120VAC 60 Hz or 230VAC 50Hz. High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead...

Stainless steel impeller shaft with modified impeller blade for use with probes to create a small bioreactor. Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 3L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

HTS insert plates are arrays of individual cell culture inserts connected by a rigid, robotics-friendly holder. This single-unit design makes insert plates ideal for running automated, high throughput drug transport (Caco-2 cells) cell toxicity studies or cell migration and invasion studies. The HTS Transwell-24 permeable support has an array of 24 wells with membrane...

HTS insert plates are arrays of individual cell culture inserts connected by a rigid, robotics-friendly holder. This single-unit design makes insert plates ideal for running automated, high throughput drug transport (Caco-2 cells) cell toxicity studies or cell migration and invasion studies. The HTS Transwell-24 permeable support has an array of 24 wells with membrane...

HTS insert plates are arrays of individual cell culture inserts connected by a rigid, robotics-friendly holder. This single-unit design makes insert plates ideal for running automated, high throughput drug transport (Caco-2 cells) cell toxicity studies or cell migration and invasion studies. The HTS Transwell-24 permeable support has an array of 24 wells with membrane...

HTS insert plates are arrays of individual cell culture inserts connected by a rigid, robotics-friendly holder. This single-unit design makes insert plates ideal for running automated, high throughput drug transport (Caco-2 cells) cell toxicity studies or cell migration and invasion studies. The HTS Transwell-24 permeable support has an array of 24 wells with membrane...

Corning® 40µm Cell Strainer is a sterile, easy-to-use device for rapidly isolating primary cells to consistently obtain a uniform single-cell suspension from tissues. Applications include stem cells and primary cells. Individually packaged, 50/case. Features Strong nylon mesh with 40- micron pores for optimal performance in a variety of applications Evenly spaced mesh pores...

Corning® 70µm Cell Strainer is a sterile, easy-to-use device for rapidly isolating primary cells to consistently obtain a uniform single-cell suspension from tissues. Applications include stem cells and primary cells. Individually packaged, 50/case Features Strong nylon mesh with 70- micron pores for optimal performance in a variety of applications Evenly spaced mesh pores...

Corning® 100µm Cell Strainer is a sterile, easy-to-use device for rapidly isolating primary cells to consistently obtain a uniform single-cell suspension from tissues. Applications include stem cells and primary cells. Individually packaged, 50/case Features Strong nylon mesh with 100- micron pores for optimal performance in a variety of applications Evenly spaced mesh pores...

For use as reservoir tray with HTS Transwell Permeable Supports TC-treated for cell attachment Same footprint as standard 24 well plate but with single rectangular well

The HTS Transwell-96 permeable support has an array of 96-wells with membrane inserts connected by a rigid, robotics-friendly tray that enables all 96 inserts to be handled as a single unit. Choice of either polyester (PET) membrane (0.4 µm, 1.0 µm, and 8.0 µm pore sizes) or polycarbonate (PC) membrane (0.4 µm, 3.0 µm, and 5.0 µm pore sizes) 0.143 cm² membrane area per well,...

For 8L, 15L, or 36L paddle assemblies. Used on all series 4510 and 4512 Spinner flasks. 100mm Center Cap Assembly for Corning® Reusable Spinner Flasks is designed for use with direct overhead drive motor. These cap assemblies required optional 8L, 15L or 36L paddle assemblies and can be used on all 4500 and 4510 series vertical sidearm flasks.

For 8L, 15L, or 36L paddle assemblies. Used on all series 4510 and 4512 Spinner flasks. 120mm Center Cap Assembly for Corning® Reusable Spinner Flasks is designed for use with direct overhead drive motor. These cap assemblies required optional 8L, 15L or 36L paddle assemblies and can be used on all 4512 series vertical sidearm flasks.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 36L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

45mm polypropylene cap Two 15.24cm stainless steel tubes Autoclavable Fits Corning glass and plastic vessels with GL45mm threads

The HTS Transwell-96 permeable support has an array of 96-wells with membrane inserts connected by a rigid, robotics-friendly tray that enables all 96 inserts to be handled as a single unit. Choice of either polyester (PET) membrane (0.4 µm, 1.0 µm, and 8.0 µm pore sizes) or polycarbonate (PC) membrane (0.4 µm, 3.0 µm, and 5.0 µm pore sizes) 0.143 cm² membrane area per well,...

The HTS Transwell-96 permeable support has an array of 96-wells with membrane inserts connected by a rigid, robotics-friendly tray that enables all 96 inserts to be handled as a single unit. Choice of either polyester (PET) membrane (0.4 µm, 1.0 µm, and 8.0 µm pore sizes) or polycarbonate (PC) membrane (0.4 µm, 3.0 µm, and 5.0 µm pore sizes) 0.143 cm² membrane area per well,...

The HTS Transwell-96 permeable support has an array of 96-wells with membrane inserts connected by a rigid, robotics-friendly tray that enables all 96 inserts to be handled as a single unit. Choice of either polyester (PET) membrane (0.4 µm, 1.0 µm, and 8.0 µm pore sizes) or polycarbonate (PC) membrane (0.4 µm, 3.0 µm, and 5.0 µm pore sizes) 0.143 cm² membrane area per well,...

For series 4510, 4512, and 4514 spinner flasks when coupled to a direct drive motor. Paddle assemblies will couple to 100 mm and 120 mm cap assemblies. Direct drive paddle assembly for use with direct drive overhead motors on series 4510 and 4512, 15L Corning® Reusable Spinner Flasks. The paddle assemblies can be used with either 100mm or 120mm direct drive center cap...

For series 4510, 4512, and 4514 spinner flasks when coupled to a direct drive motor. Paddle assemblies will couple to 100 mm and 120 mm cap assemblies. Direct drive paddle assembly for use with direct drive overhead motors on series 4510 and 4512, 36L Corning® Reusable Spinner Flasks. The paddle assemblies can be used with either 100mm or 120mm direct drive center cap...