Sonstiges

This strong, non-scratch and inert FDA grade, USP Class VI Teflon® PTFE blade fits all standard button-tip stirring shafts. “Long-groove” keyhole provides easy insertion into flask neck Rotates into proper position for stirring action Autoclavable TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

This strong, non-scratch and inert FDA grade, USP Class VI Teflon® PTFE blade fits all standard button-tip stirring shafts. “Long-groove” keyhole provides easy insertion into flask neck Rotates into proper position for stirring action Autoclavable TEFLON® is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Easy to set up and use, this compact device saves the time and expense of receiving a dry ice delivery. Can be attached to a liquid CO2 cylinder (not included) equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of dry ice in only a few minutes. Each 50lb. cylinder makes from 10-16 blocks of dry ice Dry ice production can be viewed through the...

Produces a solid 454gm (16oz) block of dry ice in one to two minutes. Each 50lb. cylinder of liquid CO2 with a dip tube will make 8 or 9 blocks of dry ice measuring 9.2 x 10.4cmL (3? x 4"). Polyethylene ice chamber is held in place by a metal clamping mechanism Porous polyethylene diffusion plate vents excess gas Built-in gas pressure gauge and relief valve Epoxy-coated...

The Frigimat® eliminates the need to buy large quantities of dry ice when only a little is needed. It employs the Joule- Thomson effect to produce a solid 454gm (16 oz) block of dry ice in one to two minutes, and the block can be removed in just 30 seconds. Brass relief valve safely vents excess gas Each 50lb. cylinder of liquid CO2 with a dip tube will make 8 or 9 blocks of...

Dry ice flakes are useful for packing around irregularly shaped items and are easily produced as needed with the Frigimat® Junior Dry Ice Maker. When the cylinder valve is opened about ¾ turn, LCO2 expands into the bag to create dry ice snow. The valve is then closed and the bag is ready to be removed and emptied. Brass nozzle screws onto any liquid LCO2 cylinder equipped...

Sterile, 100% cotton, absorbent twill-backed velveteen squares are 15.2cm x 15.2cm (6 x 6"). Available in Black or White Packed in a sealed bag with three inner locking bags each containing 12 squares, 36 pcs. total Note: Sterilized products are not returnable.

Sterile, 100% cotton, absorbent twill-backed velveteen squares are 15.2cm x 15.2cm (6 x 6"). Available in Black or White Packed in a sealed bag with three inner locking bags each containing 12 squares, 36 pcs. total Note: Sterilized products are not returnable.

Replacement tips and battery fit discontinued Scienceware® pen-style Colony Counter model F37862-0000. Long life, red and black felt-tip markers work on plastic or glass and are oil and water resistant Ink is removable with ethyl alcohol Replacement Lithium battery is 3V Panasonic cr1220

A cost effective and accurate way to count colonies of bacteria or other microorganisms grown on an agar plate. This simple to operate device marks, counts, and gives an audible and visual alert each time a count is registered. The lightweight, pen-style design reduces the likelihood of error, combining all aspects of counting into one motion. F37862-0002 is CE marked. Fast,...

Use this economical and reusable Cell Lifter to scrape cell lysates as well as to remove and harvest tissue cultures from all types of dishes. Narrow blade is ideal for use in 35 and 60mm Petri dishes and 6 and 12 well cell culture clusters Angled and chiseled blade with smooth handle is molded from polypropylene for good chemical resistance and easy cleaning Autoclavable at...

The Sample Cutter is a one-piece polycarbonate plastic tool for handling samples of semi-solid foods or materials. Three tined fork has a sharp rocker knife on its back edge and a strong handle Sold in pairs; use one tool as a fork to hold material while using knife edge of the other tool to cut off a sample Samples can be picked up using the fork tines Autoclavable at 121°C...

Semi-Flexible nylon scraper attached to a rigid fiberglass handle provides a secure grip when reaching into deep vessels. Nylon scraper will not scratch glass Scraper, when removed from handle, can be sterilized at 100ºC Scraper is 11.4 x 17.8cmL (4½ x 7”) with one rounded corner Overall length: 60" Scraper meets FDA Regulation Title 21 paragraphs 170-199, 21 CFR 177.1500...

Smooth, chemical-resistant plastic scrapers are useful for removing residues from filters, cleaning containers, mixing and distributing solids in fluids, spreading pastes over large areas, and many other scraping, spreading, stirring or residue removing tasks. Blade dimensions: 12.7cmW (5”) x 15.2cmL (6”) Tapers from 9.5mm (?”) down to a chisel edge Upper end extends into a...

Smooth, chemical-resistant plastic scrapers are useful for removing residues from filters, cleaning containers, mixing and distributing solids in fluids, spreading pastes over large areas, and many other scraping, spreading, stirring or residue removing tasks. Blade dimensions: 12.7cmW (5”) x 15.2cmL (6”) Tapers from 9.5mm (?”) down to a chisel edge Upper end extends into a...

Smooth, chemical-resistant plastic scrapers are useful for removing residues from filters, cleaning containers, mixing and distributing solids in fluids, spreading pastes over large areas, and many other scraping, spreading, stirring or residue removing tasks. Blade dimensions: 12.7cmW (5”) x 15.2cmL (6”) Tapers from 9.5mm (?”) down to a chisel edge Upper end extends into a...

Molded of chemically-resistant polypropylene plastic, this dust pan has a very thin forward edge for collecting fine dust. Excellent for liquid or semi-solid chemical waste spills Curved rise near the front edge keeps contents from accidentally falling out Deep back permits safe transport of waste for proper disposal Steam autoclavable at 121ºC (250ºF)

Safely sample and dispense corrosive liquids with these high-density polyethylene plastic ladles. Rigid bowl has a handle securely welded at an ergonomically efficient angle

Safely sample and dispense corrosive liquids with these high-density polyethylene plastic ladles. Rigid bowl has a handle securely welded at an ergonomically efficient angle

For easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1?”) in diameter and welded to a rigid sampling bowl at a 45° angle for easier sampling from an elevated position Choose from a variety of handle lengths; hook at end for...

For easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1?”) in diameter and welded to a rigid sampling bowl at a 45° angle for easier sampling from an elevated position Choose from a variety of handle lengths; hook at end for...

For easy sampling from tanks, vats, lakes, etc., these high-density polyethylene plastic dippers will not rust or corrode, provide excellent chemical resistance and float, “just in case.” Handles are 2.9cm (1?”) in diameter and welded to a rigid sampling bowl at a 45° angle for easier sampling from an elevated position Choose from a variety of handle lengths; hook at end for...

This Beta box is made from 9.5mm (?") clear acrylic with tightfitting joints that reduce exposure to radioactive isotopes. Excellent visibility of contents Includes removable lid and non-skid feet

Fabricated from 9.5mm (?") clear acrylic for all around visibility of stored contents, this box stores radioactive materials such as P-32, S-35 and C-14. Hinged lid with a hasp is provided for locking; lock and cable or chain not included Entire unit may be secured by utilizing a locking ¼" cable through the anti-theft connectors which are securely attached to the box...