Ständer

Epoxy coated steel wire holder is chemical and corrosion resistant. Supports a single 50ml conical tube at bottom and half height locations Durable and economical Autoclavable

Specifically designed for incubating 1.5 ml microcentrifuge tubes, this rack includes a hold-down disk which maintains a constant pressure on the tube caps and prevents them from opening during internal air expansion. The polypropylene disk with threaded handle screws into the foam-filled TPX® polymethylpentene plastic rack and holds tubes firmly in place Rack floats while...

Specifically designed for incubating 1.5 ml microcentrifuge tubes, this rack includes a hold-down disk which maintains a constant pressure on the tube caps and prevents them from opening during internal air expansion. The polypropylene disk with threaded handle screws into the foam-filled TPX® polymethylpentene plastic rack and holds tubes firmly in place Rack floats while...

This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable

These epoxy coated steel wire racks hold 100mm x 20mm plastic Petri dishes and are easily loaded and emptied from the top. Wide front openings permit easy access but prevent dishes from sliding out Not suitable for glass Petri dishes Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)

Increase workspace and efficiently transport large quantities of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9½") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14½") high size holds eighty-four 100mm Petri dishes. Silicone holding strips grip each Petri dish; easily insert and remove groups of dishes without disturbing upper or lower...

Increase workspace and efficiently transport large quantities of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9½") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14½") high size holds eighty-four 100mm Petri dishes. Silicone holding strips grip each Petri dish; easily insert and remove groups of dishes without disturbing upper or lower...

Increase workspace and efficiently transport large quantities of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9½") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14½") high size holds eighty-four 100mm Petri dishes. Silicone holding strips grip each Petri dish; easily insert and remove groups of dishes without disturbing upper or lower...

Increase workspace and efficiently transport large quantities of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9½") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14½") high size holds eighty-four 100mm Petri dishes. Silicone holding strips grip each Petri dish; easily insert and remove groups of dishes without disturbing upper or lower...

Increase workspace and efficiently transport large quantities of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9½") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14½") high size holds eighty-four 100mm Petri dishes. Silicone holding strips grip each Petri dish; easily insert and remove groups of dishes without disturbing upper or lower...

Increase workspace and efficiently transport large quantities of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9½") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14½") high size holds eighty-four 100mm Petri dishes. Silicone holding strips grip each Petri dish; easily insert and remove groups of dishes without disturbing upper or lower...

The Petri Dish Incubation Tray holds 100mm (4") Petri dishes securely on an incubator rack. Excellent aid for keeping cell cultures organized 28 holes in bottom allow air passage; 19mm (¾") in diameter 1.6mm (¹???") thick, white epoxy-coated steel Steam autoclavable at 121ºC (250ºF) for 15-20 min

Clear, TPX® rack with polypropylene posts securely holds up to fifty-four 100mm Petri dishes. Shipped flat, they can be assembled in minutes. Easily viewed through the clear base and divider Dishes can be removed with one hand Built-in handle provides easy transport Rubber feet help prevent rack from sliding on the benchtop Autoclavable

These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121ºC (250ºF). Polypropylene racks have white surfaces that make color comparisons easy; sturdy and chemical resistant; will not shatter or...

These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121ºC (250ºF). Polypropylene racks have white surfaces that make color comparisons easy; sturdy and chemical resistant; will not shatter or...

These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121ºC (250ºF). Polypropylene racks have white surfaces that make color comparisons easy; sturdy and chemical resistant; will not shatter or...

These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121ºC (250ºF). Polypropylene racks have white surfaces that make color comparisons easy; sturdy and chemical resistant; will not shatter or...

These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121ºC (250ºF). Polypropylene racks have white surfaces that make color comparisons easy; sturdy and chemical resistant; will not shatter or...

Molded of a special blend of polypropylene that is heavier than water, these racks sink to the bottom of the bath and will not tip over. All racks are 21.3L x 11cmW (8³/? x 4?/??") Steam autoclavable at 121ºC (250ºF)

Molded of a special blend of polypropylene that is heavier than water, these racks sink to the bottom of the bath and will not tip over. All racks are 21.3L x 11cmW (8³/? x 4?/??") Steam autoclavable at 121ºC (250ºF)

These polypropylene racks provide a practical method of pipetting and storing a large number of samples. Easy tracking of last tube filled by using alternate rows and rotating the tubes Useful in clinical labs for storage of samples Steam autoclavable at 121ºC (250ºF)

These polypropylene racks provide a practical method of pipetting and storing a large number of samples. Easy tracking of last tube filled by using alternate rows and rotating the tubes Useful in clinical labs for storage of samples Steam autoclavable at 121ºC (250ºF)

Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and for use in cell culture laboratories. Perfect for incubating microtubes in a beaker of water Buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy Insert tubes from the top and easily remove them by pressing the rack...

Efficiently prepare agar media slants with this test tube slant rack. Choose from 13-16mm or 16-20mm tube openings in 40 numbered and lettered places. Not stackable. Turning the rack to one side will slant tubes 5º; produces a large surface area useful for aerobic cultures Turning to the other side will slant tubes 20º; produces a smaller surface area ideal for anaerobic...