No results were found for the filter!
Corning® CellBIND® 225cm² Angled Neck Cell Culture Flask with Vent Cap 225cm² available growth area Manufactured from optically clear virgin polystyrene Treated with a Corning® CellBIND® surface treatment for enhanced cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic
Content 25 Stück (€14.38 * / 1 Stück)
€359.61
Order No.: 1165149
Manufacturer Art. No.: 3293
Corning® Reusable Gas and Media Handling Fitting with Dual 1/4 Inlets for 15L Angled Sidearm Flasks Dual angled sidearm fittings can be used for aseptically transferring medium into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes, which extend to the bottom of the flask, are held in place by modified polyphenylene...
Content 1 Stück
€607.31
Order No.: 1018897
Manufacturer Art. No.: 4519-170
Corning® Reusable Gas and Media Handling Fitting with Dual 1/4 Inlets (1 long, 1 short tube) for 8L Angled... Used to aseptically transfer medium, sparge the cell culture medium directly or add gases to the head space above the cell culture medium Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. One or two 316 stainless steel tubes extend to the bottom of the flask; the other is a shorter 6 length. Both tubes are held in place by...
Content 1 Stück
€607.31
Order No.: 1018898
Manufacturer Art. No.: 4519-171
Corning® Reusable 18 mm pH, Oxygen or Temperature Probe Insertion Fitting for Vertical Sidearm Flasks Used to secure pH, O2, or temperature sensors in large spinner flasks with vertical sidearms Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. The 316 sensors are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable. Spare parts for sidearm...
Content 1 Stück
€271.26
Order No.: 1018899
Manufacturer Art. No.: 4519-172
Corning® Reusable Gas and Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 1L Angled Sidearm... Dual angled sidearm fittings can be used for aseptically transferring medium into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes, which extend to the bottom of the flask, are held in place by modified polyphenylene...
Content 1 Stück
€562.32
Order No.: 1018900
Manufacturer Art. No.: 4519-173
Corning® Reusable Gas and Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 500 mL Angled... Dual angled sidearm fittings can be used for aseptically transferring medium into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes, which extend to the bottom of the flask, are held in place by modified polyphenylene...
Content 1 Stück
€555.39
Order No.: 1018901
Manufacturer Art. No.: 4519-174
Corning® Corning® Reusable Gas Venting Cap with 50 mm 0.2 µm PTFE Filter with Sanitary Fitting for Vertical... Used to provide gases into larger spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable....
Content 1 Stück
€362.02
Order No.: 1018903
Manufacturer Art. No.: 4519-177
Corning® Reusable Gas Delivery Fitting with 1/4 Inlet for Vertical Sidearm Flasks Used to provide gases into larger spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable....
Content 1 Stück
€433.99
Order No.: 1018862
Manufacturer Art. No.: 4519-102
Corning® Reusable Gas Delivery and Venting Fitting with 1/8 and 1/4 Inlets for Vertical Sidearm Flasks Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and media handling fittings, they allow Spinner Flasks to operate as bioreactors when they are attached to appropriate cell culture controllers at costs...
Content 1 Stück
€692.68
Order No.: 1018863
Manufacturer Art. No.: 4519-104
Corning® Corning® Reusable Gas Venting Cap with 50 mm 0.2 µm PTFE Filter for Vertical Sidearm Flasks Used to provide gases into larger spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable....
Content 1 Stück
€256.99
Order No.: 1018864
Manufacturer Art. No.: 4519-106
Corning® Reusable 12 mm Oxygen Probe Insertion Fitting for Vertical Sidearm Flasks Used to secure pH, O2, or temperature sensors in large spinner flasks with vertical sidearms Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. The 316 sensors are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable. Spare parts for sidearm...
Content 1 Stück
€275.39
Order No.: 1018865
Manufacturer Art. No.: 4519-108
Corning® Reusable 12 mm pH Probe Insertion Fitting for Vertical Sidearm Flasks Used to secure pH, O2, or temperature sensors in large spinner flasks with vertical sidearms Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. The 316 sensors are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable. Spare parts for sidearm...
Content 1 Stück
€275.39
Order No.: 1018866
Manufacturer Art. No.: 4519-110
Corning® Reusable Media Handling Fitting with Dual 1/8 Inlets for 8L or 15L Vertical Sidearm Flasks Used to introduce medium aseptically into large spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely...
Content 1 Stück
€650.94
Order No.: 1018867
Manufacturer Art. No.: 4519-112
Corning® Reusable Media Handling Fitting with Dual 1/8 Inlets for 36L Vertical Sidearm Flasks Used to introduce medium aseptically into large spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely...
Content 1 Stück
€650.94
Order No.: 1018868
Manufacturer Art. No.: 4519-114
Corning® Reusable Media Handling Fitting with Dual 1/4 Inlets for 8L or 15L Vertical Sidearm Flasks Used to introduce medium aseptically into large spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely...
Content 1 Stück
€684.34
Order No.: 1018869
Manufacturer Art. No.: 4519-116
Corning® Reusable Media Handling Fitting with Dual 1/4 Inlets for 36L Vertical Sidearm Flasks Used to introduce medium aseptically into large spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely...
Content 1 Stück
€684.34
Order No.: 1018870
Manufacturer Art. No.: 4519-118
Corning® Reusable Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 8L or 15L Vertical Sidearm... Used to introduce medium aseptically into large spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely...
Content 1 Stück
€663.44
Order No.: 1018871
Manufacturer Art. No.: 4519-120
Corning® Reusable Gas and Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 8L Angled Sidearm... Dual angled sidearm fittings can be used for aseptically transferring medium into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes, which extend to the bottom of the flask, are held in place by modified polyphenylene...
Content 1 Stück
€562.26
Order No.: 1018872
Manufacturer Art. No.: 4519-121
Corning® Reusable Media Handling Fitting with Combination 1/8 & 1/4 Inlets for 36L Vertical Sidearm Flasks Used to introduce medium aseptically into large spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely...
Content 1 Stück
€663.44
Order No.: 1018873
Manufacturer Art. No.: 4519-122
Corning® Reusable Media Handling Fitting with Single 1/2 Inlets for 8L or 15L Vertical Sidearm Flasks Used to introduce medium aseptically into large spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely...
Content 1 Stück
€542.44
Order No.: 1018874
Manufacturer Art. No.: 4519-124
Corning® Reusable Media Handling Fitting with Single 1/2 Inlets for 36L Vertical Sidearm Flasks Used to introduce medium aseptically into large spinner flasks with vertical sidearms. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Gas filters are PTFE, 0.2 µm porosity. The 316 stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely...
Content 1 Stück
€584.07
Order No.: 1018875
Manufacturer Art. No.: 4519-126
Corning® Reusable 12 mm Temperature Probe Insertion Fitting for Vertical Sidearm Flasks Used to secure pH, O2, or temperature sensors in large spinner flasks with vertical sidearms Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. The 316 sensors are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The fittings are completely autoclavable. Spare parts for sidearm...
Content 1 Stück
€275.39
Order No.: 1018876
Manufacturer Art. No.: 4519-128
Corning® Reusable Gas and Media Handling Fitting with Dual 1/8 Inlets for 1L Angled Sidearm Flasks Dual angled sidearm fittings can be used for aseptically transferring medium into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes, which extend to the bottom of the flask, are held in place by modified polyphenylene...
Content 1 Stück
€501.99
Order No.: 1018877
Manufacturer Art. No.: 4519-150
Corning® Reusable Gas and Media Handling Fitting with Dual 1/8 Inlets for 3L Angled Sidearm Flasks Dual angled sidearm fittings can be used for aseptically transferring medium into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes, which extend to the bottom of the flask, are held in place by modified polyphenylene...
Content 1 Stück
€508.58
Order No.: 1018878
Manufacturer Art. No.: 4519-151