Others

For attaching separating funnels with ground opening NS 29 (2x AS 1.13 necessary per separating funnel). For basic holder AS 1.10 only.

Prevents potential injuries at the rotating shafts and stirring elements. Can be directly attached to the stirring motors RW 16 basic, RW 20 digital and the EUROSTAR series. Length adjustment: 190 - 310 mm Material: plexiglass

Manual pellet press for powders; good combustible substances

With the stirring shaft R 50, the T 50 digital is quickly converted into a high speed stirrer. For rapid mixing, dissolving, and disagglomerating pigment agglomerates. For operational safety a protective cage is fitted around the mixing element. Immersion depth: 180 mm Working range: 0,25 - 30 l Material: stainl. steel (AISI 316L)

Ø 20 mm x 20,5 mm high

Suitable for dispersing instrument T 25 digital Working range: 50 - 2.000 ml Stator diameter: 25 mm Immersion depth: 40 - 165 mm Materials in contact with medium: PTFE, AISI 316L Suitable for solvents Max. temperature 180 °C Sterilization methods: all methods

Suitable for dispersing instrument T 25 digital Working range: 100 - 2.000 ml Stator diameter: 25 mm Immersion depth: 40 - 165 mm Materials in contact with medium: PTFE, AISI 316L Suitable for solvents Max. temperature: 180 °C Sterilization methods: all methods

25 pieces A single crucible is allowed to be used for up to 25 combustions Ø 20 mm x 19,5 mm high

For clamping flask necks, condenser, etc up to 11 cm diameter.

Allows vessels to be inserted in the heating bath HBR 4 digital without obstructing movement of the rotating magnetic bars.

100 pieces Material: PE With known calorific value To fill in samples with low calorific value, powdery, and with low specific gravity Dimension: 40 x 35 mm

100 pieces Material: PE With known calorific value To fill in samples with a low calorific value, powdery and with low specific gravity Dimension: 70 x 40 mm

For direct connection of tempering hoses with M 16x1 screw nut connector (e.g. LT 5.20 / LT 5.21 / H.FKM.12) to IKA reactor vessels LR 2000.3 and LR 2000.4. Thread reactor side: R 1/4” male Thread hose side: M16x1 male. Material: stainless steel Working conditions: up to 260°C

For flask volume 25 ml*

For flask volume 50 ml*

For flask volume 100 ml*

For flask volume 200 ml / 250 ml*

For flask volume 500 ml*

Two AS 1.6 clamping devices are required for fastening a clamping roll to the corresponding basic holder (for basic holder AS 1.10 only).

Two AS 1.6 and two AS 1.7 clamping devices are required for fastening two clamping rolls one above the other (for clamping separating funnels). For basic holder AS 1.10 only.

Consisting of the IKAFLON® and TRIKA® Magnetic stirring bars: IKAFLON® 10 Magnetic stirring bar IKAFLON® 15 Magnetic stirring bar IKAFLON® 20 Magnetic stirring bar IKAFLON® 25 Magnetic stirring bar IKAFLON® 30 Magnetic stirring bar IKAFLON® 40 Magnetic stirring bar IKAFLON® 50 Magnetic stirring bar IKAFLON® 80 Magnetic stirring bar TRIKA® 25 Magnetic stirring bar TRIKA® 42...

Used to crush fibrous substances such as paper and vegetation, but also for plastics and material with a low specific weight. Material stainl. steel (AISI 301)

Set of VA combustion crucibles, big, 25 Pc

500 pieces cut to length With known calorific value