No results were found for the filter!
SP Bel-Art No-Wire Multi-Tube Rack; 18 Places Choose from two space saving rack configurations, both styles accommodate round and conical bottom tubes. White polypropylene; steam autoclavable at 121ºC (250ºF) Shipped flat; easy assembly Dimensions: 24.6 x 10.4 x 6.4cmH (9¹¹/?? x 4¹/? x 2¹/?")
Content 1 Stück
€64.18
Order No.: 2457593
Manufacturer Art. No.: F18745-3017
SP Bel-Art No-Wire Test Tube Rack; For 16- 20mmTubes, 40 Places, Blue A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds. Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain their stability even in agitated water Also perfect for use outside the water...
Content 1 Stück
€32.97
Order No.: 2457594
Manufacturer Art. No.: F18747-0002
SP Bel-Art No-Wire Test Tube Half Rack; For 20- 25mm Tubes, 12 Places Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121ºC (250ºF) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")
Content 1 Stück
€35.34
Order No.: 2457595
Manufacturer Art. No.: F18748-0025
SP Bel-Art Poxygrid Test Tube Rack; For 10- 13mmTubes, 72 Places, Green Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of 223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks, a...
Content 1 Stück
€66.55
Order No.: 2457596
Manufacturer Art. No.: F18750-0000
SP Bel-Art Poxygrid Test Tube Rack; For 10- 13mmTubes, 72 Places, Blue Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of 223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks, a...
Content 1 Stück
€66.55
Order No.: 2457597
Manufacturer Art. No.: F18750-0001
SP Bel-Art Poxygrid Test Tube Rack; For 10- 13mmTubes, 72 Places, Orange Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of 223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks, a...
Content 1 Stück
€65.64
Order No.: 2457599
Manufacturer Art. No.: F18750-0003
SP Bel-Art Tubing Holder for Beakers; Tubing upto ? in., Polypropylene (Pack of 6) This polypropylene plastic clip holds flexible tubing steady and fits securely onto the edge of beakers or pitchers up to ¼" thick. 5.1cm (2") long arm has a hole to accept tubing up to 9.5mm (?") O.D. Autoclavable
Content 6 Stück (€6.09 * / 1 Stück)
€36.55
Order No.: 2457553
Manufacturer Art. No.: F18235-0000
SP Bel-Art Polypropylene Funnel Holder for Two 1to 6 in. Funnels Non-corrosive polypropylene plastic funnel holder and clamp supports several funnel sizes. Outer ring supports 76 to 152mm (3 to 6") top diameter funnels Removable inner ring holds smaller funnels from 25 to 76mm (1 to 3") top diameter Includes two bushings for 12.7mm (½") or 9.5mm (?") diameter support rods
Content 1 Stück
€41.71
Order No.: 2457554
Manufacturer Art. No.: F18242-0000
SP Bel-Art Serum Vial Rack; For 13-16mm Vials, 40Places Just the right size for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 and 16-20mm diameter). Longlasting and corrosion-resistant Fit most water baths for elevated temperature incubations End plates handles Top shelf height: 41mm (1???") Polypropylene; steam autoclavable at 121ºC (250ºF)
Content 1 Stück
€49.00
Order No.: 2457566
Manufacturer Art. No.: F18513-1640
SP Bel-Art Microcentrifuge Tube Ice Rack; For 1. These two piece racks include a lower tray to hold water or ice flakes. Choose from two sizes to best suit your needs. Small rack holds 105, 400 ?L microcentrifuge tubes or other tubes with a diameter of 8mm and is stackable. Large rack holds 120, 1.5ml microcentrifuge tubes or other tubes with a diameter under 12mm and is not stackable. Molded of highimpact polystyrene.
Content 1 Stück
€166.03
Order No.: 2456848
Manufacturer Art. No.: H18907-0000
SP Bel-Art, H-B Stainless Steel Clamping With five hole sizes ranging from 3.5mm to 14.5mm, this holder accommodates various thermometers including liquid in glass, electronic with probe, and bimetal with probe. Stainless steel, spring loaded clip attaches securely to laboratory containers, shelves up to 3/8” thick, and more Rubber bumpers on clip prevent scratching Durable polyurethane foam provides secure grip to...
Content 1 Stück
€60.17
Order No.: 2456393
Manufacturer Art. No.: B61400-7300
SP Bel-Art Poxygrid Petri Dish Mini Rack; 100mm, The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized. Holds six 100mm Petri dishes with lids Ideal for lab transport and incubation of dishes Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)
Content 1 Stück
€33.40
Order No.: 2456000
Manufacturer Art. No.: F18979-0006
SP Bel-Art Thermometer Rack; 25 Places, 57/8 x This polypropylene rack holds up to 25 thermometers in correct vertical position to prevent separation which may occur when thermometers are stored improperly. Top and middle plate hole diameters: 7.9mm (????") Bottom plate has 3.2mm (¹/?") diameter drain holes Distance between top and bottom plates is 10.5cm (4¹/?") Steam autoclavable at 121ºC (250ºF)
Content 1 Stück
€89.68
Order No.: 2456001
Manufacturer Art. No.: F18981-0001
SP Bel-Art ProCulture 100mm Petri Dish Rack; 84 Places, 14½ in., Blue Increase workspace and efficiently transport large quantities of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9½") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14½") high size holds eighty-four 100mm Petri dishes. Silicone holding strips grip each Petri dish; easily insert and remove groups of dishes without disturbing upper or lower...
Content 1 Stück
€324.12
Order No.: 2456003
Manufacturer Art. No.: F18982-0314
SP Bel-Art Stackable Petri Dish Incubation Tray; Increases overall capacity of your incubator by holding five 100mm diameter or fifteen 60mm diameter Petri dishes. Each tray includes two large label areas for critical sample identification by marker or label Holes in tray bottom facilitate air flow Polypropylene plastic; can be disinfected with 70% ethanol or common laboratory disinfectants Not recommended above 100°C...
Content 3 Stück (€33.33 * / 1 Stück)
€100.00
Order No.: 2456004
Manufacturer Art. No.: F18983-1000
SP Bel-Art 72mm Contact Plate Rack; 60 Places, Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with builtin handle has ample space for labeling Up to four racks can be stacked together and interlocked to prevent accidental knock over Polypropylene;...
Content 1 Stück
€121.44
Order No.: 2456005
Manufacturer Art. No.: F18990-0000
SP Bel-Art 100mm Petri Dish Rack; 42 Places, Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with builtin handle has ample space for labeling Up to four racks can be stacked together and interlocked to prevent accidental knock over Polypropylene;...
Content 1 Stück
€109.48
Order No.: 2456006
Manufacturer Art. No.: F18991-0000
SP Bel-Art ProCulture 60mm Petri Dish Rack; 10½ x 6¾ x 6¾ in., 54 Places, Plastic This rack is useful for safe transport and incubation of 60mm Petri dishes and helps to streamline benchtop sample processing. Rack base is epoxy coated steel, and all other parts are made of white polypropylene. Racks are shipped flat and easily assemble in minutes. Six columns hold up to fiftyfour Petri dishes with lids 10½ x 6¾" base area preserves benchtop space Large...
Content 1 Stück
€102.98
Order No.: 2456007
Manufacturer Art. No.: F18991-0060
SP Bel-Art Poxygrid Centrifuge Tube Rack; For Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). Epoxycoated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter) Heatcured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range:...
Content 1 Stück
€49.67
Order No.: 2456020
Manufacturer Art. No.: F19856-0250
SP Bel-Art Poxygrid Centrifuge Tube Rack; For This unique steel wire rack allows storage and transport of up to four (4) 500ml conical bottom centrifuge tubes. Heatcured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: 223ºC (-369ºF) to 121ºC (250ºF); autoclavable
Content 1 Stück
€53.43
Order No.: 2456021
Manufacturer Art. No.: F19856-0500
SP Bel-Art Heavy Duty Test Tube Rack; For 13-16mm These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport. Stackable and compact Base tier has rounded wells with drain holes Top tier has lettered and numbered rows Polypropylene; steam autoclavable at 121ºC (250ºF) Dimensions: 21.3L x 11cmW (8³/? x 4?/??")
Content 1 Stück
€54.65
Order No.: 2455964
Manufacturer Art. No.: F18856-0000
SP Bel-Art Heavy Duty Test Tube Rack; For 16-20mm These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport. Stackable and compact Base tier has rounded wells with drain holes Top tier has lettered and numbered rows Polypropylene; steam autoclavable at 121ºC (250ºF) Dimensions: 21.3L x 11cmW (8³/? x 4?/??")
Content 1 Stück
€54.65
Order No.: 2455965
Manufacturer Art. No.: F18857-0000
SP Bel-Art Heavy Duty Test Tube Rack; For 20-25mm These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport. Stackable and compact Base tier has rounded wells with drain holes Top tier has lettered and numbered rows Polypropylene; steam autoclavable at 121ºC (250ºF) Dimensions: 21.3L x 11cmW (8³/? x 4?/??")
Content 1 Stück
€55.56
Order No.: 2455966
Manufacturer Art. No.: F18858-0000
SP Bel-Art Heavy Duty Test Tube Rack; For 25-30mm These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport. Stackable and compact Base tier has rounded wells with drain holes Top tier has lettered and numbered rows Polypropylene; steam autoclavable at 121ºC (250ºF) Dimensions: 21.3L x 11cmW (8³/? x 4?/??")
Content 1 Stück
€57.20
Order No.: 2455967
Manufacturer Art. No.: F18859-0000