Electro chemical appliance

Distribution pipe with 10 outlet holes (5 mm), connection via hose olive (outer diameter 12 mm) Length with connection: 515 mm Material: stainless steel 1.4301

"The pump connection set PDS.IB.R.RO is used for homogeneous temperature control of large bath vessels. The set includes a 90°C elbow which can be connected directly to the ICC pump on the pressure side. A short FKM hose provides the connection to the rectangular distribution pipe, from which the medium flows through holes along the entire length. The distribution pipe and...

VOL-SP-13.5 is an optional spindle for an extended viscosity range. It is especially suitable for sample volumes of 13.5 ml.

VOL-SP-2.1 is an optional spindle for an extended viscosity range. It is especially suitable for sample volumes of 2.1 ml. It is required to use the 2.1 ml chamber VOL-C-RTD-2.1 in combination with the VOL-SP-2.1 spindle. The chamber is available as accessory.

VOL-SP-3.8 is an optional spindle for an extended viscosity range. It is especially suitable for sample volumes of 3.8 ml. It is required to use the 3.8 ml chamber VOL-C-RTD-3.8 in combination with the VOL-SP-3.8 spindle. The chamber is available as accessory.

VOL-SP-4.2 is an optional spindle for an extended viscosity range. It is especially suitable for sample volumes of 3.8 ml. It is required to use the 4.2 ml chamber VOL-C-RTD-3.8 in combination with the VOL-SP-4.2 spindle. The chamber is available as accessory.

The optional chamber VOL-C-RTD-2.1 for VOLS-1 is especially suitable for expensive and valuable samples. A temperature sensor is already integrated in the chamber and thus allows for temperature measurement during viscosity determination. It is required to use the VOL-SP-2.1 spindle in combination with the 2.1 ml chamber VOL-C-RTD-2.1. The spindle is available as accessory.

The optional chamber VOL-C-RTD-3.8 for VOLS-1 is especially suitable for expensive and valuable samples. A temperature sensor is already integrated in the chamber and thus allows for temperature measurement during viscosity determination. It is required to use the VOL-SP-3.8 spindle in combination with the 3.8 ml chamber VOL-C-RTD-3.8. The spindle is available as accessory.

The optional chamber VOL-C-RTD-4.2 for VOLS-1 is especially suitable for expensive and valuable samples. A temperature sensor is already integrated in the chamber and thus allows for temperature measurement during viscosity determination. It is required to use the VOL-SP-4.2 spindle in combination with the 4.2 ml chamber VOL-C-RTD-4.2. The spindle is available as accessory.

Holder for S 25 easy clean dispersing tools to use in a dish washer

Stainless steel bath for magnetic stirrer RO 15, size L, 25 l volume Distribution set PDS.IB.R.RO included Max. temperature: 130 °C Bath opening (usable sample area): 489 x 313 x 98 mm Total external dimensions (depth/ width/ height): 678 x 361 x 355 mm

Set incl. different electrodes for Screening System: Graphite electrode (V2100) (1x) Glassy carbon electrode (1x) Magnesium electrode (1x) Zinc electrode (1x) Nickel foam electrode (1x) Nickel electrode (1x) Lead electrode (1x) Lead bronze electrode (1x) Copper electrode (1x)

RVC electrode Set of 16

Set incl. different electrodes: Boron-doped diamond electrode (2x) Cobalt electrode (2x) Gold electrode (2x) Niobium electrode (2x) Silver electrode (2x) Tungsten electrode (2x) Titanium electrode (2x)

IKA e-Hive provides a 'Constant Voltage' (voltage max. = 25 V) screening platform with a maximum of 24 reactions simultaneously (no individual control). This efficient screening tool is recommended for early stage reaction discovery. For example, in order to quickly sort possible entries, e-Hive can run 24 reactions with different substrates under the intended reaction...

The IKA ElectraSyn GOGO module expands the field of application of ElectraSyn 2.0. The extension allows reactions in ElectraSyn 2.0 vials away from the device. However, the reaction is controlled by ElectraSyn 2.0. An extension is e.g. required if a reaction must be carried out at defined temperatures.

IKA Pro-Divide can be used for divided cell reactions. It consists of two PTFE cells separated from each other by a glass frit (pore size 10-16 micron) equipped with an O-ring, and two specially designed stir bars. Features: · Compatibility with temperature control · Preliminary sealing · Flexibility of solution volume (3 – 7 mL in each chamber) · Convenience of identifying...

Electrode with platinum plated on ceramic substrate, set of 2. When used as the anode, the electrode with platinum plated on ceramic substrate provides more durability than platinum plated on copper, while providing the surface property of platinum. The Electrode can also be recommended as cathode and counter electrode.

The IKA Pro-Seal allows users of ElectraSyn 2.0 to reach a vacuum as low as 50 mbar within the glass vial in order to facilitate the exchange of air for inert gas in the reaction environment. Sealing mechanisms within the cap limit the flow of gases into and out of the vial while in use. All current ElectraSyn 2.0 glass vials (1 ml/ 2 ml/ 5 ml/ 10 ml) and electrodes are...

With the Calibration cap users are able to re-calibrate and adjust their ElectraSyn 2.0 easily at any time by the press of a button. There is the possibility to run reference-CV`s in order to validate the measurements.

Anode made of copper for screening platform e-Hive. The e-Hive electrodes consist of the cylinder (recommended cathode) and the rod (recommended anode). The active surface area of the anode is up to: 100 mm2. Further materials on request.

Anode made of stainless steel for screening platform e-Hive. The e-Hive electrodes consist of the cylinder (recommended cathode) and the rod (recommended anode). The active surface area of the anode is up to: 100 mm2. Further materials on request.

The double-walled beaker DWB 600 has a filling volume of 600 ml. It can be connected to an external cooling or heating source and is therefore suitable for tempering the sample inside the beaker.

Wire grid tray, chrome plated Dimensions (L x D): 548 mm x 421 mm Max. loading capacity: 30 kg