Ständer

Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of -223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks,...

Ideal for mimicking the 96-place format used in microplates, deep-well plates and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid temperature changes of samples when transferring between ice bath and heated water bath Rigid wire construction with blue epoxy finish Steam autoclavable at 121ºC (250ºF)

Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of -223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks,...

Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of -223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks,...

Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of -223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks,...

For high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly

Protect your samples from loss and contamination. Hold 1.5ml or 2.0ml microcentrifuge tubes securely in a water bath, in an ice bucket, or on the benchtop. Immobilizing tabs allow tubes to be stored securely; ensures that the caps stay locked in place even if tipped over 28 numbered locations for easy sample identification Raised handle allows rack to be lifted without...

Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when under pressure, floating or submerged. For use in water baths, ice or on the benchtop. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered...

Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when under pressure, floating or submerged. For use in water baths, ice or on the benchtop. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered...

Round holes with tight tolerances hold 13mm tubes firmly for accurate processing reducing lost samples and potential damage to instruments. Increased efficiency is achieved by using the numbered locations for programming, resulting in higher throughput. Designed for automated liquid handling systems Ideal when cell identification/location is critical; typical applications...

Choose from two space saving rack configurations, both styles accommodate round and conical bottom tubes. White polypropylene; steam autoclavable at 121ºC (250ºF) Shipped flat; easy assembly Dimensions: 24.6 x 10.4 x 6.4cmH (9¹¹/?? x 4¹/? x 2¹/?")

Choose from two space saving rack configurations, both styles accommodate round and conical bottom tubes. White polypropylene; steam autoclavable at 121ºC (250ºF) Shipped flat; easy assembly Dimensions: 24.6 x 10.4 x 6.4cmH (9¹¹/?? x 4¹/? x 2¹/?")

A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds. Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain their stability even in agitated water Also perfect for use outside the water...

Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121ºC (250ºF) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")

Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of -223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks,...

Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of -223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks,...

Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a temperature range of -223ºC (-369ºF) to 121ºC (250ºF); autoclavable All racks have square holes, three decks,...

Just the right size for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 and 16-20mm diameter). Long-lasting and corrosion-resistant Fit most water baths for elevated temperature incubations End plates handles Top shelf height: 41mm (1???") Polypropylene; steam autoclavable at 121ºC (250ºF)

These two piece racks include a lower tray to hold water or ice flakes. Choose from two sizes to best suit your needs. Small rack holds 105, 400 ?L microcentrifuge tubes or other tubes with a diameter of 8mm and is stackable. Large rack holds 120, 1.5ml microcentrifuge tubes or other tubes with a diameter under 12mm and is not stackable. Molded of high-impact polystyrene.

The epoxy-coated steel wire Petri Dish Mini Rack helps keep benchtops neat and organized. Holds six 100mm Petri dishes with lids Ideal for lab transport and incubation of dishes Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)

This polypropylene rack holds up to 25 thermometers in correct vertical position to prevent separation which may occur when thermometers are stored improperly. Top and middle plate hole diameters: 7.9mm (????") Bottom plate has 3.2mm (¹/?") diameter drain holes Distance between top and bottom plates is 10.5cm (4¹/?") Steam autoclavable at 121ºC (250ºF)

Increase workspace and efficiently transport large quantities of Petri dishes. Available in 4 colors and two sizes; the 24.1cm (9½") high size holds forty-eight 100mm Petri dishes, and the 36.8cm (14½") high size holds eighty-four 100mm Petri dishes. Silicone holding strips grip each Petri dish; easily insert and remove groups of dishes without disturbing upper or lower...

Increases overall capacity of your incubator by holding five 100mm diameter or fifteen 60mm diameter Petri dishes. Each tray includes two large label areas for critical sample identification by marker or label Holes in tray bottom facilitate air flow Polypropylene plastic; can be disinfected with 70% ethanol or common laboratory disinfectants Not recommended above 100°C...

Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with built-in handle has ample space for labeling Up to four racks can be stacked together and interlocked to prevent accidental knock over Polypropylene;...