Ständer

Safely transport, incubate and store Petri dishes and contact plates, and helps to streamline benchtop sample processing. Configured in 6 columns with bottom access slots for easy removal of plates Center divider with built-in handle has ample space for labeling Up to four racks can be stacked together and interlocked to prevent accidental knock over Polypropylene;...

This rack is useful for safe transport and incubation of 60mm Petri dishes and helps to streamline benchtop sample processing. Rack base is epoxy coated steel, and all other parts are made of white polypropylene. Racks are shipped flat and easily assemble in minutes. Six columns hold up to fiftyfour Petri dishes with lids 10½ x 6¾" base area preserves benchtop space Large...

Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter) Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range:...

This unique steel wire rack allows storage and transport of up to four (4) 500ml conical bottom centrifuge tubes. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223ºC (-369ºF) to 121ºC (250ºF); autoclavable

These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport. Stackable and compact Base tier has rounded wells with drain holes Top tier has lettered and numbered rows Polypropylene; steam autoclavable at 121ºC (250ºF) Dimensions: 21.3L x 11cmW (8³/? x 4?/??")

These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport. Stackable and compact Base tier has rounded wells with drain holes Top tier has lettered and numbered rows Polypropylene; steam autoclavable at 121ºC (250ºF) Dimensions: 21.3L x 11cmW (8³/? x 4?/??")

These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport. Stackable and compact Base tier has rounded wells with drain holes Top tier has lettered and numbered rows Polypropylene; steam autoclavable at 121ºC (250ºF) Dimensions: 21.3L x 11cmW (8³/? x 4?/??")

These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport. Stackable and compact Base tier has rounded wells with drain holes Top tier has lettered and numbered rows Polypropylene; steam autoclavable at 121ºC (250ºF) Dimensions: 21.3L x 11cmW (8³/? x 4?/??")

Molded of a special blend of polypropylene that is heavier than water, these racks sink to the bottom of the bath and will not tip over. All racks are 21.3L x 11cmW (8³/? x 4?/??") Steam autoclavable at 121ºC (250ºF)

These polypropylene racks provide a practical method of pipetting and storing a large number of samples. Easy tracking of last tube filled by using alternate rows and rotating the tubes Useful in clinical labs for storage of samples Steam autoclavable at 121ºC (250ºF)

Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and for use in cell culture laboratories. Perfect for incubating microtubes in a beaker of water Buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy Insert tubes from the top and easily remove them by pressing the rack...

Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and for use in cell culture laboratories. Perfect for incubating microtubes in a beaker of water Buoyant TPX® brand polymethylpentene with tiny bubbles throughout for additional buoyancy Insert tubes from the top and easily remove them by pressing the rack...

Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly pressing down against the bench until the legs touch, releasing the tubes Racks are 6.4mm (¹/?") thick with 19mm (³/?") long...

Molded of steam autoclavable polypropylene, these racks fit 400ml or 1000ml beakers. Choose from 8 or 20 place racks with 10.8mm holes for 1.5ml microtubes. Tubes remain completely immersed in a beaker while tops rest above the rack Unload by lightly pressing down against the bench until the legs touch, releasing the tubes Racks are 6.4mm (¹/?") thick with 19mm (³/?") long...

Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4¹¹/?? x 3¹/??")

This 20 place polypropylene round floating rack fits most cryotubes and holds them tightly in a circular pattern formed by 12 outer and 8 inner openings. Excellent for holding cryotubes during work or incubation Floats in water; can also be used for quickly thawing frozen cells in a 37ºC water bath Easily remove tubes by holding the center handle and pushing the rack down...

Tilt your test tube rack to 25°, 35° or 45° to reduce hand strain when working with pipettors. Also ideal for creating agar slant tubes or use with the Mini-Magnifier (F37865-0000) to aid in the viewing of Petri dishes. Base legs have predetermined slots that stand slides in and out of to easily change angles Fits racks up to 29.3 x 24.2 x 8.3cm H (11????” x 9????” x 3¼”)...

These two piece racks include a lower tray to hold water or ice flakes. Choose from two sizes to best suit your needs. Small rack holds 105, 400 ?L microcentrifuge tubes or other tubes with a diameter of 8mm and is stackable. Large rack holds 120, 1.5ml microcentrifuge tubes or other tubes with a diameter under 12mm and is not stackable. Molded of high-impact polystyrene.

Designed for preparing and storing 0.2ml thin-walled PCR tubes and strip tubes before or after PCR sample processing applications. Compact polypropylene rack has 96 wells that keep tubes securely upright in an 8 x 12 array. Rack has an alphanumeric grid to assist in easy sample identification. Includes translucent polypropylene cover to protect samples and allows viewing...

Capturing hazardous chemical and contaminant spills when transferring from one vessel to another is easy with these portable spill containment trays. Large tray has a spill surface that will support multiple flasks, beakers or a rack of test tubes Smaller tray is ideal for smaller vessels and tight spaces Can also be used for storing hazardous, corrosive chemicals, stains,...

This tray with rack insert can accommodate up to fifty 1.5ml tubes (or other tubes with a diameter less than 12mm) for large volume benchtop processing. To further protect tubes during transport or storage while also maintaining stackability, an optional polypropylene cover is available. Deep tray holds more ice and water for extended use time Includes flat perimeter rim for...

Maximize storage and save benchtop space with microcentrifuge tube racks that are stackable when loaded or empty. Locking clips firmly connect multiple racks together to form larger arrays that can be easily transported. Securely holds 24 microcentrifuge tubes, either 0.5 ml or 1.5 - 2.0ml Can be combined when multiple tube sizes are used Durable, lightweight polycarbonate;...

These epoxy coated steel wire racks hold 100mm x 20mm plastic Petri dishes and are easily loaded and emptied from the top. Wide front openings permit easy access but prevent dishes from sliding out Not suitable for glass Petri dishes Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)

Poxygrid® 100mm Petri Dish Dispensing Racks hold 11 or 33 plastic Petri dishes (100mm x 20mm). Petri dishes are easily dispensed one at a time from the bottom of the stack; dishes are loaded at top of rack Rack tilts toward the rear for convenient presentation of dishes Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F) Not...