Ständer

Poxygrid® 100mm Petri Dish Dispensing Racks hold 11 or 33 plastic Petri dishes (100mm x 20mm). Petri dishes are easily dispensed one at a time from the bottom of the stack; dishes are loaded at top of rack Rack tilts toward the rear for convenient presentation of dishes Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F) Not...

Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson). Useful for transport, incubation and storage of contact plates; convenient organization Steam autoclavable at 121ºC (250ºF)

Durable blue epoxy-coated steel wire racks hold 30 or 10 contact plates with lids (72mm maximum diameter) (RODAC®, Becton Dickinson). Useful for transport, incubation and storage of contact plates; convenient organization Steam autoclavable at 121ºC (250ºF)

Chemical and corrosion-resistant steel wire test tube rack is coated with heat-cured epoxy for long life and easy cleaning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F); autoclavable All racks have square holes, three decks, a slotted grid bottom and reinforced edges

Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy Unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a...

Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy Unaffected by organic solvents, salts, weak acids and weak alkalis Will withstand a...

Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable

Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable

Made of epoxy-coated steel wire, these racks hold up to thirty-six 50ml centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223ºC (-369ºF) to 121ºC (250ºF); autoclavable

Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50ml conical centrifuge tube. Non-grip style (white) allows the tube to be lifted freely from holder as needed Grip style (blue) stays with the tube when it is lifted from the bench top Tubes can easily be removed from grip style holders by holding the...

Leave hands free for pipetting and other critical tasks with these polystyrene plastic tube holders that securely hold a 50ml conical centrifuge tube. Non-grip style (white) allows the tube to be lifted freely from holder as needed Grip style (blue) stays with the tube when it is lifted from the bench top Tubes can easily be removed from grip style holders by holding the...

The most versatile conical tube holder on the market, it sets up in just seconds to hold either a 15ml or a 50ml conical tube. Open uprights allow you to view the entire contents of the tube; no more guessing if there is liquid remaining in the conical bottom Tube can be easily lifted from the holder Pinching the uprights allows carrying the holder with the tube Autoclavable...

These white polypropylene racks are available in 2 popular grid sizes. Open sides make them adaptable for use in a tray of crushed ice Dimensions: 12.8 x 10.5 x 4.3cmH (5¼ x 4? x 1¾") Steam autoclavable at 121ºC (250ºF)

These polypropylene test tube racks stack to conserve space, even when filled with tubes. Holds 72 micro sample tubes in 6 x 12 rows Steam autoclavable at 121ºC (250ºF)

These polypropylene test tube racks stack to conserve space, even when filled with tubes. Holds 72 micro sample tubes in 6 x 12 rows Steam autoclavable at 121ºC (250ºF)

Perfect for benchtop use or freezer storage, these compact, double-sided polypropylene racks accommodate 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for easy sample identification. Twelve rack colors assist in sample organization and...

Double-sided, compact polypropylene rack is perfect for use on the benchtop or in the freezer. One side accommodates 0.5ml microcentrifuge tubes while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 96 wells on each side keep tubes upright in an 8 x 12 array. Fourteen rack colors assist in sample organization and quick visual identification Alphanumeric index...

Double-sided, compact polypropylene rack is perfect for use on the benchtop or in the freezer. One side accommodates 0.5ml microcentrifuge tubes while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 96 wells on each side keep tubes upright in an 8 x 12 array. Fourteen rack colors assist in sample organization and quick visual identification Alphanumeric index...

Open style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Work on the benchtop, float in the water bath Tubes are held tightly in rack to assure no “pop-up” tubes or “floaters”, while pressing the legs of the rack on the bench will raise tubes and...

Open style floating rack provides tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Work on the benchtop, float in the water bath Tubes are held tightly in rack to assure no “pop-up” tubes or “floaters”, while pressing the legs of the rack on the bench will raise tubes and...

These heavy-duty 3 tier test tube racks have hand grips in the end plates for easy transport. Stackable and compact Base tier has rounded wells with drain holes Top tier has lettered and numbered rows Polypropylene; steam autoclavable at 121ºC (250ºF) Dimensions: 21.3L x 11cmW (8³/? x 4?/??")

A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds. Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain their stability even in agitated water Also perfect for use outside the water...

A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds. Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain their stability even in agitated water Also perfect for use outside the water...

A great alternative to wire racks, with price and space saving advantages over other plastic racks. Dimensions for all racks are 24.6 x 10.4 x 6.4cm high (9.7 x 4.1 x 2.5”) and they assemble in seconds. Made of a special blend of autoclavable polypropylene; will sink in a water bath and maintain their stability even in agitated water Also perfect for use outside the water...